Tiny Tapeout 回应良率疑问与模型更新范围Tiny Tapeout Addresses Yield Questions and Model Updates
Tiny Tapeout 官方回应设计者提问:SKY130 工艺的良率问题极其罕见,迄今遇到的情况都是焊接问题;GF180 则出现过 wire bonding 问题。由于所用工艺已相当成熟,官方表示从未发现可检测的良率问题。官方同时称会更新 datasheet 以及供设计者参考的 pad 模型(主要面向模拟设计),但通常不更新 PDK 的模型。Tiny Tapeout answered designer questions: yield issues on SKY130 are extremely rare and every case so far has been a soldering problem, while GF180 has seen wire bonding problems. Because the technologies used are well dialed in, the team says it has never seen detectable yield issues. It also updates its datasheet and the pad models designers use (mostly for analog work), but usually does not update the PDK models.
来源 · 2 条Sources · 2
- @tinytapeout
@Prajval2030 We update our datasheet and also the pad models we have for designers wanting to take into account that in designs (mostly for analog). If you meant the PDK's models, then not usually.
- @tinytapeout
@photoncmndr For SKY130 it's been very rare, and so far always a problem with the soldering. For GF180 we've had problems with the wire bonding. As the technologies that we work with are very well dialed in, there's never been any detectable yield issues.